2.1 Connect the camera
The camera will be hooked up to the receiver, but they still need a power source for the camera. There is no battery built-in in the camera. You don’t need the cable to pass through the wall as long as you have an AC outlet in the garden. You also can order the 10 meters extension cable to connect to your socket if there is no AC outlet nearby.
Before installing the camera in your birdhouse, wire it up inside the house and test the whole system, make sure everything works as it should be.
1. First, connect one end of the DC extension cable to the WiFi birdhouse camera.
2. Next, connect the other male terminal end with the DC12V power adaptor and Plug the power adaptor into the AC outlet.
3.After a couple of seconds, you should hear two small click sounds which means the camera is booting up successfully.
4.Next power up the receiver and attach the receiver to your router by using the Ethernet cable.
5.Now Install iCSee app and add the station to your mobile app