Usually the IP bird box camera is pre-set to DHCP which means it will receive the IP address assignment from your router automatically. This can avoid network configuration of the IP birdhouse camera. In some case, the camera may fail to obtain the correct IP address from your router, you still can manually change the IP address by using the PC software. The PC software use the broadcast technology to discover the camera on the same local network. Even the bird box camera’s IP configure is not correct, the software should be able to discover the device as long as it is online.
Instructions
This below instruction is suitable for the IP (WiFi) birdhouse camera from Green-Backyard, Gardenature, Oertl, Green-feathers, and Handykam which are using iCSee or XMEYE mobile application. Both iCSee and XMEYE are Interchangeable.
1. First, go to “Device Manager”. In the next screen, wait for a few seconds, The software will discover your camera automatically and listed on the first row.
2. Next tick the check box in front of the IP address to select the camera you would like to add to the software. Click “Add” button to confirm.
3. Now find the IP icon under the “Operation” and click it.
4. Next in the popup screen, click “auto Get Address”. The software will try to assign the correct IP address to the camera. You also can manually input the IP address and the gateway to the camera. Now Click “Modify” to save the new IP setting to the camera. The default password is empty, if you forget the camera’s password, please reset the camera.
Related Source
How to change bird box camera to static IP address( Windows software )