The birdhouse camera’s motion detection is not accurately as it detect the change between two images. Any change such as flash light could trigger the alarm. However, the motion detection function still can save lots of memory space and time to review the recording files. You can enable the birdhouse camera’s motion detection by using the application on your mobile phone. This article will show you how to set motion detection area in order to eliminate some possible false alarms. Install the software to your Mac before you try to set the bird box camera’s motion detection area.
Instructions
This below instruction is suitable for the IP (WiFi) birdhouse camera from Green-Backyard, Gardenature, Oertl, Green-feathers, and Handykam which are using iCSee or XMEYE mobile application. Both iCSee and XMEYE are Interchangeable.
1. First, Choose the “Device Config” in the Home page.
2. Next Click the device name on the left row and choose the “Video Detect”.
3. Now Click “Setting” next to “Region”, Disable the areas you don’t want motion checking by the camera. Click “OK” to save.
NOTE: The blue block is the selected area.
Related Sources
How to enable birdhouse camera’s motion recording( iOS & Android )
How to Set birdhouse camera to send push message to mobile phone( iOS & Android )