3.1 Offline and Power

If you see video loss on the HDMI TV, please follow the instruction below to check the camera.

1.Firstly, You can unplug the power adapter and put it back. These operations will force the camera to reboot. Now find the joystick inline and set the camera mode to CVBS –

Firstly, make sure the ‘UP’is facing up.

2.Next, push the joystick to right, hold it for 5 seconds, and release.

3.If this issue persists, you will need to check all the cable connections. If you have a power meter, you can measure the power output at the pigtail of the power adapter. These operations can make sure the camera is getting the power.

The above solution should avoid disturbing the birds. If both ways don’t work out, you may need to wait until the birds left, and take the camera off.

Once you have the camera, please power up the camera and cover the lens with a black plate. You suppose to hear the camera making a clicking sound. That is very important because it means the camera is working properly.