How Can We Help?

< All Topics
Print

2.2 Install Micro SD card

The camera supports most of 32GB & 64GB micro SD cards and some of the 128GB micro SD cards such as the Sandisk 128GB A1 which we have tested. There is new files system after 128GB and some model is backward compatible.

Before you install the micro SD card, you should power off the camera. If you insert the micro SD card with power ON, the camera will not detect your card.

The micro SD card has a too different side, please make sure you have the contact pin that has faced the lens direction before you insert it into the slot.

You should feel the card get stuck to the slot which means the card is installed properly.

Now power up the camera and log into the app to see whether the card is being recognized by the camera or not.

1.Click the settings icon on top-right screen.

2 In the new screen, click “storage management” to check the SD card memory space. You should see the camera has read the memory space capacity.

NOTE: choose ‘Stop’ if you want the camera stop recording when the memory space is full

3. Now go to the playback screen, you should be able to view the video files a few minutes ago.

If you can see the camera recognized the micro SD card, but you can’t find any recording files, please make sure the camera’s time is sync. The files are indexed through the time. If the camera’s time doesn’t match, you will experience is to find the video.

Was this article helpful?
0 out Of 5 Stars
5 Stars 0%
4 Stars 0%
3 Stars 0%
2 Stars 0%
1 Stars 0%
How can we improve this article?
Previous 2.1.1 Solar Battery Power Camera
Next 2.3 Adjust the lens
Table of Contents